03/10/2025 5:06 a.m.
http://stage.cablematic.com/en/products/converter-multimode-optical-fiber-1000-mbps-rj45-to-sc-2km-UF031/
http://stage.cablematic.com/en/products/converter-multimode-optical-fiber-1000-mbps-rj45-to-sc-2km-UF031/
Converter multimode optical fiber 1000 Mbps RJ45 to SC 2Km
Converter multimode optical fiber 1000 Mbps RJ45 to SC 2Km
REF: UF031
Specifications
- 1000Base-TX (RJ45 UTP) to 1000Base-FX (SC fiber optic connector) converter.
- Complies with IEEE802.3z, IEEE802.3ab, IEEE 1000Base-T and IEEE 1000Base-FX standards.
- Operational in MM (Multi-Mode) fiber that allows a maximum distance of 2 km at 1000Mbps, which extends the maximum distance supported by the UTP topology that limits it to 100m.
- It allows full-duplex and half-duplex.
- 550-1310nm wavelength.
Watch video
PVP
€57.17
Price including VAT:
€57.17
PVD
€50.24
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
100%safe
Specifications
- 1000Base-TX (RJ45 UTP) to 1000Base-FX (SC fiber optic connector) converter.
- Complies with IEEE802.3z, IEEE802.3ab, IEEE 1000Base-T and IEEE 1000Base-FX standards.
- Operational in MM (Multi-Mode) fiber that allows a maximum distance of 2 km at 1000Mbps, which extends the maximum distance supported by the UTP topology that limits it to 100m.
- It allows full-duplex and half-duplex.
- 550-1310nm wavelength.
Related products
Keywords
Did not find what you were looking for? These topic could help you
Purchased together regularly
More info
Converter capable of linking the signals generated in a copper cable to fiber optic signals. This enables you to take advantage of fiber optics without making changes to your installation. Ideal to facilitate the connection of a copper UTP Ethernet equipment through a fiber optic link and thus have a better bandwidth, reduce interference and transmit data at a higher speed than a copper cable would allow.
specs
specs
- 1000Base-TX (RJ45 UTP) to 1000Base-FX (SC fiber optic connector) converter.
- Complies with IEEE802.3z, IEEE802.3ab, IEEE 1000Base-T and IEEE 1000Base-FX standards.
- Operational in MM (Multi-Mode) fiber that allows a maximum distance of 2 km at 1000Mbps, which extends the maximum distance supported by the UTP topology that limits it to 100m.
- It allows full-duplex and half-duplex.
- 550-1310nm wavelength.
- Converter size: 102 x 70 x 25 mm.
- Gross Weight: 254 g
- Product size (width x depth x height): 7.0 x 10.5 x 2.6 cm
- Number of packages: 1
- Packages size: 21.0 x 11.5 x 5.3 cm
- Master-pack: 20
Technical terms
- Types of network cables (UTP, FTP, STP)
- RJ45
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)
