Alarm system for home or business that can be extended with all kinds of wireless sensors. It allows to be connected to RTB (Basic Telephony Network or fixed telephony) so that when the alarm is triggered it makes calls to the telephones predefined by the user to alert of the possible intrusion or alarm. Economic system in which the companies that sell alarm center services are not necessary, thus eliminating costsnsuales to act as simple intermediaries between the alarm and the client. The alarm center can be your own mobile phone, which is ultimately where you would end up calling a central alarm company.

Specifications

• Central unit of reduced size: 150 x 117 x 29 mm. It has 6 status LEDs (Power, arm, alarm, set, home and signal) and 4-digit LCD display.
• The unitedCentral d has a numeric keypad with 4 function keys.
• Anti-interference and anti-decoding function of the remote control.
• It allows to program 97 zones based on wireless sensors (zone code from 1 to 97 in the viewfinder) and 2 zones based on wired sensors (zone code from 91 to 97 in the viewfinder). Zones can have more than one configured sensor or accessory. Each zone can have its own parametersof configuration relative to the armed, disarmed, delay in detection, etc.
• It includes a wireless magnetic sensor sensor (like the reference #LB12), a wireless volumetric sensor (like the reference #LB02), two radiofrequency remote controls, a siren, the power supply for the central unit and a telephone cable.
• Allows you to program up to 6 phone numbers that the alarm callsto notify the activation of a sensor. Calls are made in order according to the priority of each number.
• It allows to program up to 3 telephone numbers to which the alarm sends an SMS message to notify the activation of a sensor. SMS messages are sent in order according to the priority of each number.
• Supports the recording of a voice message of up to 10 seconds in length. This message will be reproducedWhen the central unit calls the predefined telephones. It may contain a style message: Alarm on Pine Street, 1.
• It allows remote access through the telephone line to execute the most typical commands: armed, disarmed, listen to the ambient sound, etc.
• Allows remote monitoring of the place of installation of the alarm. This function allows you to hear the ambient sound.
• It allows the iInstallation of more wireless sensors and sensors. The installation and coding of the new sensors is quick and easy, as the central unit must simply recognize the new sensors. Compatible with accessories #LB0x, #LB1x, #LB2x, #LB3x, #LB4x, #LB5x, #LB6x, #LB7x, #LB8x and #LB9x. This particular model is not compatible with models #LB02 or #LB27.
• It has two female RJ11 connectors for the passage throughs of the telephone line.
• Programming is done from the phone's keypad.
• The supplied remote controls have 4 buttons with the following functions: armed, partial armed (night), disarmed and emergency.
• In addition to alarm allows the programming of an emergency action plan for when the emergency button on the remote control is pressed or a special button is installed(Ref. #LB34). This benefit is ideal for the care of the elderly.
• Circuit or sensor failure notification function.
• Includes internal backup battery 24 hours (approximate), so that the alarm will continue to operate even if there are power outages or sabotage.
• It allows to configure 3 control centers. It is compatible with the international identification system of contact Ademco ID protocol.
• All local or remote configuration operations are protected by password.
• It has 6 terminals on the back for the connection of wired wireless sensors (L1 to L6, ANT, AND, Z1, Z2, GNS, + 12V).
• Easy to use and install. Any home or business can have one installed.
• The manuals are supplied in English.

• Gross Weight: 1.1 kg
• Number of packages: 1
• Master-pack: 10

• Product file 1