12/28/2024 5:50 a.m.
https://stage.cablematic.com/en/products/arduino-4-relay-shield-AR110/
https://stage.cablematic.com/en/products/arduino-4-relay-shield-AR110/
Arduino 4 Relay Shield
Arduino 4 Relay Shield
REF: AR110
Specifications
- Arduino board built with 4 relays to handle high power loads that cannot be controlled by Arduino board digital I / O due to controller current and voltage limits.
- Compatible with all standard 5V and 3.3V Arduino boards.
- It has four LEDs to control the status of the relays, on or off.
- Each relay has two NC (normally closed) and NO (normally open) and two common contacts. Mounted on two 6-contact t-block terminals.
- Operating voltage: 5V Coil current consumption: 140 mA (with all relays on, approximately 35 mA each). Maximum charging voltage: 48 V Maximum switching capacity: 60 W
Watch video
PVP
€21.00
Price including VAT:
€21.00
PVD
€20.21
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
100%safe
Specifications
- Arduino board built with 4 relays to handle high power loads that cannot be controlled by Arduino board digital I / O due to controller current and voltage limits.
- Compatible with all standard 5V and 3.3V Arduino boards.
- It has four LEDs to control the status of the relays, on or off.
- Each relay has two NC (normally closed) and NO (normally open) and two common contacts. Mounted on two 6-contact t-block terminals.
- Operating voltage: 5V Coil current consumption: 140 mA (with all relays on, approximately 35 mA each). Maximum charging voltage: 48 V Maximum switching capacity: 60 W
Related products
Keywords
Did not find what you were looking for? These topic could help you
Purchased together regularly
More info
Range of electronic hardware devices and free software (Open Source) with a re-programmable microcontroller, ideal for developing electronics projects both professionally, for education or home users. It allows to connect different input and output components (I / O), Interface that allows to carry out the automation of systems and robotics, as well as control and supply different devices. It can be programmed in Windows as well as macOSx and GNU / Linux.
Specifications
Specifications
- Arduino board built with 4 relays to handle high power loads that cannot be controlled by Arduino board digital I / O due to controller current and voltage limits.
- Compatible with all standard 5V and 3.3V Arduino boards.
- It has four LEDs to control the status of the relays, on or off.
- Each relay has two NC (normally closed) and NO (normally open) and two common contacts. Mounted on two 6-contact t-block terminals.
- Operating voltage: 5V Coil current consumption: 140 mA (with all relays on, approximately 35 mA each). Maximum charging voltage: 48 V Maximum switching capacity: 60 W
- Dimensions: 52 x 29 x 74 mm (width x height x depth).
- Gross Weight: 69 g
- Product size (width x depth x height): 5.2 x 7.4 x 2.9 cm
- Number of packages: 1
- Packages size: 8.1 x 6.1 x 3.3 cm
Technical terms
- Differences between NO and NC
Differences between NO and NC
These are two types of contacts widely used in electrical installations and circuits. Distinguishing the difference of these two types is very simple.
- A NO (normally open) type contact is one that does not let the current flow while the same or the device is in standby or standby mode. The most common type NO contact is eg house switches, which remain open (not closedCircuit) until the switch is pressed.
- The NC contacts (normally closed) are the opposite of the NO contact, they let the current pass while they are in standby or at rest to be actuated. An example would be a thermal protection relay of a motor, which remains closed while there is voltage.
