11/17/2024 12:05 p.m.
https://stage.cablematic.com/en/products/digital-laser-distance-measuring-tools-80m-tolsen-HX061/
Digital laser distance measuring tools 80m Tolsen
REF: HX061
Specifications
  • Measuring range: 0.05m to 80m.
  • Accuracy: 1.5 mm.
  • UnitedMeasurement: m, ft, in.
  • Type of laser: 620-690 nm.
  • Laser class: II (<1 mW).
play_button Watch video
More info
PVP 66.97
25.45
Price including VAT: 25.45
PVD 58.86
22.37
Shipping costs: 0,00 *
GB-SE1 1ES
2 years
warranty
14 days
returns
OUTLET

In stock
Available more than 10

More info
Specifications
  • Measuring range: 0.05m to 80m.
  • Accuracy: 1.5 mm.
  • UnitedMeasurement: m, ft, in.
  • Type of laser: 620-690 nm.
  • Laser class: II (<1 mW).

More info

Laser distance meter up to 80m. Practical distance meter that allows measurement from a distance of 0.05m to 80m, with an accuracy of 1.5mm. Digital meter with a large backlit viewfinder, which allows to visualize the distance, from the meter to the surface to which the laser points.

Specifications
  • Measuring range: 0.05m to 80m.
  • Accuracy: 1.5 mm.
  • UnitedMeasurement: m, ft, in.
  • Type of laser: 620-690 nm.
  • Laser class: II (<1 mW).
  • Laser pointer: 6mm (10m), 30mm (50m), 60mm (100m).
  • Environmental protection against moisture: IP54.
  • It works with 2 batteries of 1.5 V type AAA (5000 measurements per set of batteries approximately).
  • Weight (without batteries): 175 g.
  • Size: 126 x 54 x 28 mm.
  • Standards: GB/T 14267-2009.
  • Keys: power, measurement, area/volume, plus, minus, viewer light, and reset.
  • Multifunction viewer.
  • Protection of contours with rubbers, to avoid damage and blows.
  • Transport case and arm strap are supplied.
  • Gross Weight: 350 g
  • Product size (width x depth x height): 12.6 x 5.4 x 2.8 cm
  • Number of packages: 1
  • Packages size: 12.6 x 5.4 x 2.8 cm
  • Master-pack: 10

Videos

play_button Watch video

Technical terms

  • IP54
  • IP Protection
IP54
Although it seems very complicated nomenclature IP standards is only a division in double digits, where each digit indicates that it is being served to meet these regulations. For the first digit would be: 5 ingress of dust can not be avoided, but it must not enter an amount that interferes with the proper functioning of equipment. For the second digit 4 is placed theequipment in your usual workplace. You should not enter the water thrown from any angle to an average of 10 liters per minute and a pressure of 80-100kN/m for a time not less than five minutes.

Do you have any question about this product?