11/20/2024 12:27 p.m.
https://stage.cablematic.com/en/products/electrical-installation-burglar-alarm-for-gsm-s250-LA031/
https://stage.cablematic.com/en/products/electrical-installation-burglar-alarm-for-gsm-s250-LA031/
Electrical installation burglar alarm for GSM S250
Electrical installation burglar alarm for GSM S250
REF: LA031
OUTLET
Specifications
- Alarm to protect electrical equipment connected by GSM.
- Detection of voltage loss of a 3-phase line and paeach of the phases separately.
- It has 8 digital inputs for the connection of 8 lines of wired sensors (volumetric, magnetic, temperature, external vibration sensors, etc.).
- Motion and vibration detection. The alarm is set to the equipment to be protected. When the equipment moves, the alarm moves and it is activated.
- Detection of opening or manipulation of the alarm. The alarm is mountedin a metal watertight compartment. If it is opened and the alarm is connected, it is activated.
Watch video
PVP
€153.07
€56.64
Price including VAT:
€56.64
PVD
€134.54
€49.78
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
OUTLET
Specifications
- Alarm to protect electrical equipment connected by GSM.
- Detection of voltage loss of a 3-phase line and paeach of the phases separately.
- It has 8 digital inputs for the connection of 8 lines of wired sensors (volumetric, magnetic, temperature, external vibration sensors, etc.).
- Motion and vibration detection. The alarm is set to the equipment to be protected. When the equipment moves, the alarm moves and it is activated.
- Detection of opening or manipulation of the alarm. The alarm is mountedin a metal watertight compartment. If it is opened and the alarm is connected, it is activated.
Related products
Keywords
Did not find what you were looking for? These topic could help you
More info
Alarm connected by GSM mobile telephony, designed to protect electrical installations, wiring, power lines, transformation units and any device that works with electricity and could be stolen. It is a protected alarm in metal housing, which allows the notification to the configured telephones, in case of attempted robbery or manipulation of the alarm. It has detection of electric fluid cuttrico for each of the 4 lines (3 phases and ground) and detection of vibrations or movement of the installation. In addition the arlarma has internal tamper, so if you try to manipulate it, it also sends the alarm signal via GSM.
Specifications
Specifications
- Alarm to protect electrical equipment connected by GSM.
- Detection of voltage loss of a 3-phase line and paeach of the phases separately.
- It has 8 digital inputs for the connection of 8 lines of wired sensors (volumetric, magnetic, temperature, external vibration sensors, etc.).
- Motion and vibration detection. The alarm is set to the equipment to be protected. When the equipment moves, the alarm moves and it is activated.
- Detection of opening or manipulation of the alarm. The alarm is mountedin a metal watertight compartment. If it is opened and the alarm is connected, it is activated.
- It has 2 relay outputs for the connection of external devices. For the programmable activation of automations in case of alarm jump.
- It allows configuring up to 5 telephones to which an alert SMS will be sent if the alarm is activated.
- Allows you to configure up to 5 phones that will be called voice if the alarmis activated
- Connection to external siren (not included).
- Connection to external environment microphone (not included). If the room mic is installed, the connection to the alarm is possible to listen to the sound.
- The programming and monitoring of the alarm status is done by sending and receiving GSM SMS messages. It is possible to carry out the assembly, disassembly, programming, to know the status of the alarm, etc.
- It has micro USB connector and software for programming "on-site" of the alarm.
- Possibility of automating a daily communication with the alarm to know the status, check its correct operation and guarantee the power supply.
- Alarm mounted in metal casing, with door protected by key. Protection to the exterior of type IP55.
- Resists electromagnetic interference (IEC55022).
- It has backup battery of 3.7 VDC and 3x1200 mAh that guarantees the operation of the alarm even if the power supply is cut off. Battery life of up to 18h (depends on the quality of the wireless connection).
- Connection for additional battery, solar panel, etc.
- The alarm is activated if the power supply is cut off for more than 2 seconds.
- Operates in the GSM 850/900 bandMHz (2W) and 1800/1900 MHz (1W).
- Operational voltage: 220 VAC (270 VAC maximum and 110 VAC minimum).
- Size: 290 x 200 x 55 mm.
- Weight: 2.50 Kg.
- Gross Weight: 2.5 kg
- Number of packages: 1
- Master-pack: 5
Technical terms
- USB
- MicroUSB
- Mini USB
- Hz
- GSM
- How to mount an alarm?
- Reversible USB Type-C
- EMI (electromagnetic interference)
- VDC
- IP Protection
- VAC
- USB 3.0
USB
The USB (Universal Serial Bus) is a standard that defines the cables, connectors and used a bus to connect, communicate, computers, peripherals and electronic devices protocols Transmission Rates Low speed (USB 1.0). Transfer rate up to 1.5 Mbit/s (188 kB/s) used in keyboard, mouse ... transfer rate up to 12 Mbit/s (1.5 MB/s) High Speed ??(USB 2.0): Rate transferencia up to 480 Mbit/s (60 MB/s) SuperSpeed ??(USB 3.0) transfer rate up to 4.8 Gbit/s (600 MB/s) Connector Types 1 - USB type A (4 pin) 2. - USB type B (4 pin) 3 - Mini A (5-pin) 4 - Mini B (5-pin) 5 - Micro A (5-pin) 6 - Micro B (5-pin)
