12/26/2024 10:14 p.m.
https://stage.cablematic.com/en/products/ir-extender-and-multiplier-4-port-IR022/
https://stage.cablematic.com/en/products/ir-extender-and-multiplier-4-port-IR022/
IR Extender and multiplier 4-port
IR Extender and multiplier 4-port
REF: IR022
Specifications
- Central unit that has a fixed cable 10.8 m long and ended in a infrared reader is installed in a visible place and receives signals from different remote controls to use.
- The central unit has minijack 3.5 connectors "where the various wires receive/transmit infrared signal connect.
- 2-wire double-ended infrared each are provided. They are based in minijack connector3.5 "at one end and double infrared emitter. shaped wires are" Y ", 1.8m in length.
- Works with a power supply of 5 VDC at 0.5 A (included).
Watch video
PVP
€29.09
Price including VAT:
€29.09
PVD
€24.14
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
100%safe
Specifications
- Central unit that has a fixed cable 10.8 m long and ended in a infrared reader is installed in a visible place and receives signals from different remote controls to use.
- The central unit has minijack 3.5 connectors "where the various wires receive/transmit infrared signal connect.
- 2-wire double-ended infrared each are provided. They are based in minijack connector3.5 "at one end and double infrared emitter. shaped wires are" Y ", 1.8m in length.
- Works with a power supply of 5 VDC at 0.5 A (included).
Related products
Keywords
Did not find what you were looking for? These topic could help you
Purchased together regularly
More info
Extender/multiplier infrared ports. It is a kit that includes an infrared receiver, a central processing unit and repeater stations cable terminations with 4 infrared. This system allows you to control various infrared equipment installed in cabinets or invisible units. Compatible with all IR commands.
Specs
Specs
- Central unit that has a fixed cable 10.8 m long and ended in a infrared reader is installed in a visible place and receives signals from different remote controls to use.
- The central unit has minijack 3.5 connectors "where the various wires receive/transmit infrared signal connect.
- 2-wire double-ended infrared each are provided. They are based in minijack connector3.5 "at one end and double infrared emitter. shaped wires are" Y ", 1.8m in length.
- Works with a power supply of 5 VDC at 0.5 A (included).
- Gross Weight: 260 g
- Product size (width x depth x height): 5.4 x 2.1 x 7.8 cm
- Number of packages: 1
- Packages size: 16.0 x 11.7 x 5.6 cm
Technical terms
- Jack connector
- VDC
Jack connector
We can find 3 types of jack connector, monaural TS connector (tip-sleeve), TRS (tip-ring-sleeve) and TRRS stereo plug (tip-ring-ring-sleeve) which is used in most mobile devices, tablets, MP3 etc ...
We can difference these 3 types of connectors according to their diameter:
1. 6.35 mm jack connector or TS.
2. 3.5mm minijack connector or TRS, is the most common, usually used in headphone's output of portable devices.
3. 2.5mm jack connector or TRRS.
It consists of a maximum of three connecting parts being called the largest mass or negative polarity and two smaller size located more towards the end of the connector,
The called positive that correspond to each channel, such three-part plug can transmit signals in two separate channels, also known as stereo signals. There's a mono version, consisting of only two parts, a negative and a positive.
A. Protector
B. Stem
C. Ring
D. Tip
E. Kindred
F. Ring (Signal Right)
G. Tip (Signal Left)
We can difference these 3 types of connectors according to their diameter:
1. 6.35 mm jack connector or TS.
2. 3.5mm minijack connector or TRS, is the most common, usually used in headphone's output of portable devices.
3. 2.5mm jack connector or TRRS.
It consists of a maximum of three connecting parts being called the largest mass or negative polarity and two smaller size located more towards the end of the connector,
The called positive that correspond to each channel, such three-part plug can transmit signals in two separate channels, also known as stereo signals. There's a mono version, consisting of only two parts, a negative and a positive.
A. Protector
B. Stem
C. Ring
D. Tip
E. Kindred
F. Ring (Signal Right)
G. Tip (Signal Left)
