11/17/2024 9:51 a.m.
https://stage.cablematic.com/en/products/passive-balun-with-rca-audio-cable-2-twisted-pair-terminals-2-units-SK009/
https://stage.cablematic.com/en/products/passive-balun-with-rca-audio-cable-2-twisted-pair-terminals-2-units-SK009/
Passive Balun with RCA audio cable 2 twisted pair terminals - 2 units
REF: SK009
Specifications
- Audio balun and passive transceiver.
- Small in size and easy to connect.
- Small module size: 45 x 22 x 22 mm.
- It has RCA-male connector and terminal block (2-pin). The RCA-male connector is mounted on a 12cm long hose.
- Does not require feeding (passive).
Watch video
PVP
€6.36
Price including VAT:
€6.36
PVD
€5.46
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 years
warranty
warranty
14 days
returns
returns
100%
safe
safe
Specifications
- Audio balun and passive transceiver.
- Small in size and easy to connect.
- Small module size: 45 x 22 x 22 mm.
- It has RCA-male connector and terminal block (2-pin). The RCA-male connector is mounted on a 12cm long hose.
- Does not require feeding (passive).
Keywords
Did not find what you were looking for? These topic could help you
More info
Pair of passive audio transceivers (RCA-male to twisted pair cable) (UTP Terminal Block 2 Terminals). It performs the functions of video balun. Designed to allow the transmission of audio signals through twisted pair cable (UTP). Twisted pair cable facilitates installation, is more economical and allows greater transmission distances without loss of quality.
Specifications
Specifications
- Audio balun and passive transceiver.
- Small in size and easy to connect.
- Small module size: 45 x 22 x 22 mm.
- It has RCA-male connector and terminal block (2-pin). The RCA-male connector is mounted on a 12cm long hose.
- Does not require feeding (passive).
- Transmission range through UTP cable: 300m (1V audio signal) and 1000m (audio signal 6)V).
- The kit includes two transceiver units.
- Gross Weight: 650 g
- Number of packages: 1
Technical terms
- Types of network cables (UTP, FTP, STP)
- RCA
Types of network cables (UTP, FTP, STP)
UTP cable is standard twisted pair is referred by its acronym UTP (Unshiedld Twiested Pair/Unshielded Twisted Pair). The major advantages of this cable are its low cost and ease of handling. Its main disadvantages are a higher error rate compared to other cable types and their limitations to work at high distances without regeneration. FTP is a type of cable caracteriza that each twisted pair is uniformly during creation. A comprehensive screening of all pairs is performed by a apantallante outer sheet. This technique allows to have similar characteristics to the shielded cable. STP is characterized by that each pair is covered with a metal mesh, in the same way that the coaxial cables, and the set of pairs is coated with a sheet apantallante. Referenced frequently with their acronym STP (Shield Twisted Pair/Shielded Twisted Pair)