01/01/2025 3:48 a.m.
https://stage.cablematic.com/en/products/rj45-tester-tool-with-probe-and-lcd-display-SA841/
https://stage.cablematic.com/en/products/rj45-tester-tool-with-probe-and-lcd-display-SA841/
RJ45 tester tool with probe and LCD display
RJ45 tester tool with probe and LCD display
REF: SA841
RENEWED
Refurbished product, perfect operation.
Original product specifications
- Continuity tester in data cables.
- Follow-up of the cables to diagnose the cut-off point or failure.
- The probe receives the tone through the data cables.
- The local module sends a continuous tone so that the probe (remote module) locates said tone.
- The probe has a sensor to track the cable to the point of failure. Startingfrom that point, no signal is received.
Watch video
Go back to the new product
![simple_arrow_right]()
PVP
€77.75
You save 46.75
Price including VAT:
€77.75
PVD
€68.33
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
RENEWED
100%safe
Original product specifications
- Continuity tester in data cables.
- Follow-up of the cables to diagnose the cut-off point or failure.
- The probe receives the tone through the data cables.
- The local module sends a continuous tone so that the probe (remote module) locates said tone.
- The probe has a sensor to track the cable to the point of failure. Startingfrom that point, no signal is received.
Original product info
Checker and locator of data cables by means of a probe. This cable tester allows you to check installed data cables, locate a cable and detect the point of failure in the cable thanks to the probe available. Designed to be used in telephone, network, twisted pair, etc. data cables. It consists of two parts:
Specifications
- Local tester or tone emitter with LCD viewfinder. It has two RJ45 connectors.for checking hoses or cables installed. It allows 4 selectable functions from the LCD viewer: Connection map, length of each of the pairs, tone and scan, configuration.
- Remote tester and cable locator. It has female RJ45 connector and fault locator probe (cuts) that also allows the identification or location of the cable you want to check or find.
Specifications
- Continuity tester in data cables.
- Follow-up of the cables to diagnose the cut-off point or failure.
- The probe receives the tone through the data cables.
- The local module sends a continuous tone so that the probe (remote module) locates said tone.
- The probe has a sensor to track the cable to the point of failure. Startingfrom that point, no signal is received.
- The probe has a potentiometer for sensitivity adjustment and a TEST button.
- The transmitter and the receiver require 9 VDC batteries (not included).
- The main module has a connection map function (pin-out). Displays graphically in the LCD viewer the pin-out of the connected cable.
- The main module has a length function. For each oneof the pairs allows to determine the length. Useful to know where there is a possible cut or failure.
- Supplied with cable terminated in crocodile clips to check any data cable, even if it has no RJ11 or RJ45 connector.
- Adapters are supplied for the verification of BNC and F coaxial connectors.
- It is supplied in a transport case.
- Gross Weight: 440 g
- Product size (width x depth x height): 15.0 x 7.4 x 3.2 cm
- Number of packages: 1
- Packages size: 19.9 x 14.8 x 5.0 cm
- Master-pack: 10
Technical terms
- RJ45
RJ45
When we talk about RJ45 ("Registered Jack" 45) we refer to a telecommunications network interface for wired connection of voice and data equipment.
This connector has 8 pins or connections and may have a specific category depending on the data transfer speed and bandwidth (category 5e, 6, etc.)
The common application is their use in Ethernet network cables under TIA/EIA-568-B standard that defines the arrangement of pins (pinout), but can also be used for other applications.
- Direct pin diagram:
EIA-568A
Pin No.1: WHITE-GREEN
Pin No.2: GREEN
Pin No.3: WHITE-ORANGE
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: ORANGE
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
EIA-568B
Pin No.1: WHITE-ORANGE
Pin No.2: ORANGE
Pin No.3: WHITE-GREEN
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: GREEN
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
- Schematic of crossed pins:
The crossover cable has one end with EIA-568A scheme and the other one with EIA-568B.
This connector has 8 pins or connections and may have a specific category depending on the data transfer speed and bandwidth (category 5e, 6, etc.)
The common application is their use in Ethernet network cables under TIA/EIA-568-B standard that defines the arrangement of pins (pinout), but can also be used for other applications.
- Direct pin diagram:
EIA-568A
Pin No.1: WHITE-GREEN
Pin No.2: GREEN
Pin No.3: WHITE-ORANGE
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: ORANGE
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
EIA-568B
Pin No.1: WHITE-ORANGE
Pin No.2: ORANGE
Pin No.3: WHITE-GREEN
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: GREEN
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
- Schematic of crossed pins:
The crossover cable has one end with EIA-568A scheme and the other one with EIA-568B.
