04/08/2025 6:01 a.m.
https://stage.cablematic.com/en/products/telescopic-tray-for-rack19-of-1u-and-depth-450mm-605-880mm-SA238/
https://stage.cablematic.com/en/products/telescopic-tray-for-rack19-of-1u-and-depth-450mm-605-880mm-SA238/
Telescopic tray for rack19 of 1U and depth 450mm 605-880mm
Telescopic tray for rack19 of 1U and depth 450mm 605-880mm
REF: SA238
RENEWED
Reconditioned product with some mark or slight blow. Damaged or non-original packaging. Fully functional.
Original product specifications
- Adjustable telescopic tray compatible with 19 "rack cabinets.
- Tray height: 1U. Useful tray size 415 x 450 mm (width x depth).
- Attachment to the 19 "rack cabinet racks using front and rear anchors.
- Adjustable guide distance from 460 mm to 600 mm.
- It has sliding telescopic guides that extend the tray 35 cm.
Watch video
Go back to the new product
![simple_arrow_right]()
PVP
€22.94
You save 15.30
Price including VAT:
€22.94
PVD
€19.56
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
RENEWED
100%safe
Original product specifications
- Adjustable telescopic tray compatible with 19 "rack cabinets.
- Tray height: 1U. Useful tray size 415 x 450 mm (width x depth).
- Attachment to the 19 "rack cabinet racks using front and rear anchors.
- Adjustable guide distance from 460 mm to 600 mm.
- It has sliding telescopic guides that extend the tray 35 cm.
Original product info
Telescopic tray compatible with 19 "rack cabinets. It has perforations in the base of the tray to better ventilate the cabinet devices. Guides with lateral bearings that allow the tray to slide out to the outside of the cabinet and thus be able to better manipulate the devices that The bottom of the guides can be modified to allow the tray to be adjusted to different spacing between racks as needed.
Specifications
Specifications
- Adjustable telescopic tray compatible with 19 "rack cabinets.
- Tray height: 1U. Useful tray size 415 x 450 mm (width x depth).
- Attachment to the 19 "rack cabinet racks using front and rear anchors.
- Adjustable guide distance from 460 mm to 600 mm.
- It has sliding telescopic guides that extend the tray 35 cm.
- Maximum weight supported: 30 Kg.
- Gross Weight: 4.24 kg
- Product size (width x depth x height): 48.0 x 47.0 x 5.0 cm
- Number of packages: 1
- Packages size: 49.5 x 48.0 x 6.0 cm
- Master-pack: 10
Technical terms
- Rack unit (U)
Rack unit (U)
There are several cabinet heights according to the needs of the installation, this height can be measured in rack units (U).
Each rack unit or U is the distance between each horizontal separation to place the different accessories inside the rack. This distance is 1.75 inches that is equal to 4.4445 cm high.
For example, if we say that a rack is 8U we will understand that it has 8 units to install device orAccessories of 4.44 cm in height.
Normally these accessories, like trays, guides, strips, etc. Occupy a unit of U (1U), but we can find that other devices or accessories occupy more units, for example can be a rack box to install a PC, a UPS, etc. It can be said that there is also a half unit of U (0.5U), in this case, two units could be installed in a rack unit.
As far as I knowEndo the units of rack that occupy the devices that we are going to install we will know the height that we need for our rack.
The size of the rack unit (U) is based on the standard specification for racks defined in EIA-310.
Each rack unit or U is the distance between each horizontal separation to place the different accessories inside the rack. This distance is 1.75 inches that is equal to 4.4445 cm high.
For example, if we say that a rack is 8U we will understand that it has 8 units to install device orAccessories of 4.44 cm in height.
Normally these accessories, like trays, guides, strips, etc. Occupy a unit of U (1U), but we can find that other devices or accessories occupy more units, for example can be a rack box to install a PC, a UPS, etc. It can be said that there is also a half unit of U (0.5U), in this case, two units could be installed in a rack unit.
As far as I knowEndo the units of rack that occupy the devices that we are going to install we will know the height that we need for our rack.
The size of the rack unit (U) is based on the standard specification for racks defined in EIA-310.
