The USB (Universal Serial Bus) is a standard that defines the cables, connectors and used a bus to connect, communicate, computers, peripherals and electronic devices protocols Transmission Rates Low speed (USB 1.0). Transfer rate up to 1.5 Mbit/s (188 kB/s) used in keyboard, mouse ... transfer rate up to 12 Mbit/s (1.5 MB/s) High Speed ??(USB 2.0): Rate transferencia up to 480 Mbit/s (60 MB/s) SuperSpeed ??(USB 3.0) transfer rate up to 4.8 Gbit/s (600 MB/s) Connector Types 1 - USB type A (4 pin) 2. - USB type B (4 pin) 3 - Mini A (5-pin) 4 - Mini B (5-pin) 5 - Micro A (5-pin) 6 - Micro B (5-pin)

or horizontal. The micro USB with five pins, which pins identification (ID) Micro AB USB connectors special work. AB connectors with pin ID can allow the device to function as a connector A or B to standard USB technology. This gives the new smart phones and other devices the option to act as either a single storage device or as provi

The mini USB connectors are smaller than their standard counterparts and have USB fifth pin. The fifth pin is known as the pin ID and is typically not used in mini USB connectors. It was designed to allow later improved USB technology. The mini USB connectors have a cycle life of at least 5000 connections and disconnections, which accommodates the mobile nature of the devices that are designed to interact. The standard USB connectors are generally used with devices that are stationary and not disconnected often.

USB 3.0 is the second major revision of the standard Universal Serial Bus (USB) connectivity for computing. USB 3.0 has transmission speeds of up to 5 Gbit/s, which is 10 times faster than USB 2.0 (480 Mbit/s). Connector Types 1 - USB type A plug 2 - 3 USB type A female - USB type B 4 - Micro USB B

USB-C reversible USB version called USB cables USB Type C Type C or USB reversible. The important thing is this type of USB is that it has top and bottom. So you may save the blows that are given involuntarily to connect the connector upside down. It is also characterized in that when connected will make an audible "click". The USB-C or reversible USB cables can reach 10 Gbps and support USB 3.0, 3.1Use is estimated up to 10,000 applications and has some measures 8.4mm x 2.6mm is also compatible with USB 3.1 and USB indicate creators

Nowadays we all have in mind the importance of controlling and verifying the bills we receive in the stores. Thanks to the different security systems implemented and the renewal of protection systems in the new current tickets, it becomes increasingly difficult to falsify, but still an extra control is highly recommended.
Counting systems or banknote detectors use the combination of vArias detection technologies to check if the ticket is false or the ticket is true.
Among the detection systems we find from the simplest (pen) to machines that verify different characteristics of the ticket to verify their authenticity.
The most common detection systems are:

1. LABEL: Simply mark the ticket to check. If the mark is displayed in black, the billetAnd is false.

Detecting machines: The most reliable, as they can combine different detection technologies such as:

1. UV: Ultraviolet detection. It allows in a visual way to verify the markings integrated in the ticket with fluorescent phosphors that can not be seen in daylight and are only visible with an ultraviolet light at a certain frequency.
2. IR: Infrared light detection: Other systemOf safety implemented in the tickets is their ink, since under a type of infrared light they exhibit a special behavior. There are two types of ink, the ink that shines when exposed to an IR light and the ink that does the opposite and absorbs the light giving a black tone.
3. MG1 and MG2: This is the magnetic detection. The tickets incorporate a magnetic security system, which is based on a band usually on the sideOf the note, of a ferromagnetic material. This security system is not visible without the proper detector. Another safety system based on magnetic detection is to print the bill with areas of magnetic ink.
4. SIZE: It is based on the detection of the ticket checking its size in length and width. Each ticket has some special characteristics and very specific in terms of measurement, each one of them is fabriTo the millimeter.
5. DD: Thickness detection. Just as each ticket has an exact size, they also have a specific thickness.