The BNC connector is a connector type, quick connect/disconnect, incoporando more security connector for coaxial cable. Initially designed as a miniature BNC Connector Type C is a type of connector used with coaxial cables like RG-58 and RG-59 RF applications that required a quick connector, suitable for UHF and constant impedance to over a wide range.

NTSC and PAL are the two coding systems for television signals, each other, they are totally incompatible. NTSC is mainly used in the United States, while the PAL system is one that is typically used in Europe. PAL: 720 x 576 pixels and 25 frames per second NTSC: 720 x 480 pixels and 29.9 frames per second.

Closed circuit television, or CCTV (stands for closed circuit television) surveillance is a technology designed to monitor a variety of environments and activities. It is called closed, that, contrary to what happens with the media, all components are linked. In addition, unlike conventional television, this is a security system designed to

An Active Pixel Sensor (APS) is a sensor that detects light based on CMOS technology and therefore known as CMOS sensor. Because CMOS technology is possible to integrate more functions on a sensor chip, such as brightness control, contrast correction, or an analog-digital converter. Advantages

Much lower power consumption

Economic (requires few external components)

If readingtaneous higher number of pixels

The digital converter may be integrated on the same chip

Blooming low ("Smear") or no

Greater flexibility in reading (faster preview, video, ...)

The pixels can be exposed and read simultaneously

Other possible topologies (the SuperCCD Fujifilm sensor employs a panel-shaped construction (octagonal) forpixels)

Different types of pixels (depending on size and sensitivity) combined

High frame rate compared to a CCD of the same size

In the diagram we can see: 1) photo-diode. 2) Amplifier. 3) metal wire. 4) Output signal. 5) Light.

A charge-coupled device or CCD (in Spanish "charge coupled device") is an integrated circuit containing a number of linked or coupled capacitors. Under the control of an internal circuit, each capacitor can transfer its electric charge to one or more of the capacitors that are at his side on the PCB. The digital alternative to CCD devices are the CMOS (complementary metal oxide semicondriver) used in some digital cameras and many webcams. Currently the CCD are much more popular in professional applications and digital cameras. In the diagram we can observe 1) photo-diode. 2) electron transfer register. 3) electric charge. 4) Horizontal Registry. 5) Output signal. 6) Amplifier. 7) Entry Light.

CCIR is a committee responsible for regulating the Spanish radio in space, this committee is responsible for standardization to operate in Spain.

The CVBS is the acronym often with composite video is designated. The idea of ??this definition means Color, Video, Erase and Sync. The most used are the known wire coaxial connector and a BNC connector or RCA cables.

hen we talk about IP code (International Protection) we talk about an international standard (IEC 60529) which classifies the protection against external factors, solid or liquid, that has a component or electronic device; LED strips, controllers, meters, security cameras, etc.

This alpha-numerically standard has been designed to sort different levels of protection. Nomenclature starts with IP followed by two numeric values.

- Example IP68:

The first value ranges from 0 to 6 and indicates the protection against solid agents. In this case, strong protection against dust.

The second value is between 0 and 8 and indicates the protection against liquid agents. In this case the complete and prolonged immersion during the time specified by the manufacturer.

We could say that the larger the number is greater IP protection has a device.

In below table, we can see different IP protections levels available.

IPXX	First digit (IPxx)	Second digit (IPxx)
0	Unprotected.	Unprotected.
1	Protection against objects of> 50 mm diameter.	Protection against vertically dripping water.
2	Protection against objects of> 12.5 mm diameter.	Protection against inclined drip water up to 15°.
3	Protection against objects of> 2 mm in diameter.	Protection against water projected from any direction, up to 60°.
4	Protection against objects of> 1 mm in diameter.	Protection against splashing water any direction.
5	Ingress of dust is not entirely revented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment .	Protection against water jets.
6	Dust tight.	Protection against strong jets of water.
7		Protection against complete immersion up to 1 meter for 30 minutes.
8		Protection against complete and prolonged immersion.

Inside the different types of connectors for power supply we find one of the most common, the DC jack. Used in most connections in electronic devices such as routers, laptops, printers etc ... is the most used due to its easy assembly and connection. These connectors are mostly used in DC power supplies and installations.
The connector is cylindricalAnd we find its version in male and female format (A). The male connector is composed of the outer and inner metal part, where in each of them the energy travels, normally the inner part is used for the positive pole and the outside for the negative, but may vary according to manufacturer.
This type of connector is found in many diameters, the most common are 3.5mm and 5.5mm. Although we can andThere are several measures in terms of length and outer or inner diameter.
Its installation is simple, we can find several types of connectors, pair to weld or to screw with terminal block, it will depend on the user to choose the most suitable in its installation.
When purchasing the male connector to perform a repair we must know its diameter, length of the connector and internal diameter. If we proceed with aTo new installation only we must make sure that the male and female connector are of the same characteristics.