Industrial module that allows to connect an RS485 serial port to a ZigBee wireless network. This module allows you to connect RS485 serial devices to a ZigBee wireless network. Module mounted in an aluminum housing and suitable for industrial uses.

About ZigBee

ZigBee is a low-power wireless transmission system. Meets the IEEE 802.15.4 standard for personal area wireless networks (wireless personal area network, WPAN). Secure communication system with low data transmission rate and low levels of power consumption, which allows to extend the life of the batteries. The most common application is in home automation.

Specifications

• Compatible with the IEEE 802.15.4 standard.
• Wireless transmission over ZigBee network.
• Operating frequency ISM: 2.4 GHz.
• Transmission distanceup to 200m (maximum).
• Network topology: point to point, point to multipoint, star, or mesh.
• It allows the operation of the coordinator (channel selection and PAN-ID to initialize the network), the operation of the router (assists in the routing of the data), and the operation of the final device (transmits/receives RF data to its parent, and not can route data)
• Channel selection: 16 (Direct Sequence Channels), and 65535 PAN-ID.
• It incorporates rSMA connector and adjustable antenna with thread.
• Low level of consumption as it is a ZigBee interface.
• It has RS485 serial port.
• Terminal connector (6-pin terminal block).

• Gross Weight: 200 g
• Product size (width x depth x height): 8.0 x 9.0 x 2.5 cm
• Number of packages: 1
• Packages size: 9.0 x 14.0 x 3.0 cm

• Product file 1
• Product file 2